WE PUT THE MOTOR INTO MOTORSPORTS
POWER COMMANDER
Excell Motorsports Power Commander V is ready to plug in and go with our own proven maps
The NEW Power Commander V
Power Commander V Product Introduction
The New Power Commander V is loaded with tons of new features. .
Below you will find some Power Commander V features.
•Reduced size from PCIIIusb (less than half of the size of PCIII)
•USB powered from computer (9 volt adapter is no longer needed for programming)
•2 position map switching function built in ( 1 Excell map included)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its
input such as boost or temperature)
•Unit has a -100/+250% fuel change range (up from -100/+100%).
This allows more adjustment range
•10 throttle position columns (up from 9 on PCIIIusb)
•Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
Power Commander V Accessories Gallery
The NEW Power Commander V and It's Accessories
AutoTune for Power Commander V
The Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work. For Harley Davidson models we ever monitor and adjust each cylinder individually for increased precision as on these models required fueling can vary significantly between the front and rear cylinder.
LCD Display for Power Commander V
The LCD Display connects to any Power Commander USB (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.
Commander III USB. Power Commander V Related Accessories
Power Commander V Accessories
Power Commander V has all the same accessories Power Commander III USB has and more. Below you can view some of these accessories.
Product Warranty
XDynojet's warranty obligations are limited to the terms set forth below:
Dynojet research Inc., ("Dynojet") warrants this product against
defects in material and workmanship for the period of one (1) year.
The warranty period begins with the date of original retail purchase.
This limited warranty is made only to the original end user purchaser
("you") of the product and does not extend to any subsequent
purchasers or owners of the product. The 'original end user" is the
first user to put the product into service in any fashion. It is your
responsibility to establish the warranty period by verifying the
original purchase date. Accordingly, to avoid dispute, you should
register online or return the warranty card to Dynojet within sixty
(60) days after the date of purchase.
Product Disclaimer
XRemainder:The sale of this product is intended for racing purposes only.
The NEW Power Commander V
Power Commander V Product Introduction
The New Power Commander V is loaded with tons of new features. .
Below you will find some Power Commander V features.
•Reduced size from PCIIIusb (less than half of the size of PCIII)
•USB powered from computer (9 volt adapter is no longer needed for programming)
•2 position map switching function built in ( 1 Excell map included)
Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its
input such as boost or temperature)
•Unit has a -100/+250% fuel change range (up from -100/+100%).
This allows more adjustment range
•10 throttle position columns (up from 9 on PCIIIusb)
•Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
Power Commander V Accessories Gallery
The NEW Power Commander V and It's Accessories
AutoTune for Power Commander V
The Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work. For Harley Davidson models we ever monitor and adjust each cylinder individually for increased precision as on these models required fueling can vary significantly between the front and rear cylinder.
LCD Display for Power Commander V
The LCD Display connects to any Power Commander USB (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.
Commander III USB. Power Commander V Related Accessories
Power Commander V Accessories
Power Commander V has all the same accessories Power Commander III USB has and more. Below you can view some of these accessories.
Product Warranty
XDynojet's warranty obligations are limited to the terms set forth below:
Dynojet research Inc., ("Dynojet") warrants this product against
defects in material and workmanship for the period of one (1) year.
The warranty period begins with the date of original retail purchase.
This limited warranty is made only to the original end user purchaser
("you") of the product and does not extend to any subsequent
purchasers or owners of the product. The 'original end user" is the
first user to put the product into service in any fashion. It is your
responsibility to establish the warranty period by verifying the
original purchase date. Accordingly, to avoid dispute, you should
register online or return the warranty card to Dynojet within sixty
(60) days after the date of purchase.
Product Disclaimer
XRemainder:The sale of this product is intended for racing purposes only.
Excell Motorsports Exhausts are Independently Dyno Tested and Certified at www.dynotechresearch.com which American Snowmobiler Magazine uses for the Shootout ® sleds! "Quote" We ve tested them all here to ensure stockness and fairness since day one! See the actual dyno sheets of the American Snowmobiler stockers (and some not so stockers caught red handed) as tested during DynoTech certification dyno runs.
FX Nytro Exhaust Systems
Available in Black and Polished
STYLING FOR THE FX NYTRO FULL SYSTEM PLASTIC
Excell Motorsports 2292 Rt. 12. Hubbardsville, NY 13355
sales@excellmotorsports.com
Ph: 315-691-6916
Fax: 315-691-2875
sales@excellmotorsports.com
Ph: 315-691-6916
Fax: 315-691-2875
FX NYTRO HEADER
Stainless Steel 304 TIG Welded Stepped Header tubes Large HI FLO Merge collector 2 inch mid pipe "1 3/4 inch Stock" For use with Stock Muffler or Any other aftermarket Silencer that fits to stock header Gain 6-7 HP and 400 RPM's with Stock DB Levels
Stainless Steel 304 TIG Welded Stepped Header tubes Large HI FLO Merge collector 2 inch mid pipe "1 3/4 inch Stock" For use with Stock Muffler or Any other aftermarket Silencer that fits to stock header Gain 6-7 HP and 400 RPM's with Stock DB Levels
CICK HERE FOR DYNO CHART
$849.95 - $1,049.95
Full System polished or Black with plastic
$499.95
$359.99